Holograms, copy-evident codes, NFC chips or markers: which anti-counterfeiting methods exist, what they check and who can check them. With selection criteria based on ISO 22383.
Brands that want to protect products against counterfeits can choose from very different methods. Some are checked by eye, some with a smartphone, some only in a lab. This overview shows the main methods for physical products, how they check and what they can do. The grouping follows the EUIPO technology guide and the ISO 22383 standard.
Note: This overview describes methods, not individual products. We do not rate the quality or cost of other solutions. Individual solutions can differ from the typical properties described here. authentic.network is itself a provider in the copy-evident code group.
Direct answer: The term covers three different tasks: identifying a product, checking that it is genuine, and analysing the checks. Depending on the solution, one or more of these functions is the focus. A normal QR scan, for example, reads an identifier. It does not show whether the label is an original.
Three layers:
Example: A workshop scans the QR code on a spare part and lands on the right product page. That only shows that the identifier is valid. Whether the code comes from the original or was photographed and reprinted can only be shown by an authenticity check.
Direct answer: There are eight main groups. They differ in how they check, what has to be added to the product, and what the feature itself can do.
| Method | Verification principle | Added to the product | Identifier | Authenticity |
|---|---|---|---|---|
| Holograms and optical features | Optical effect when tilted, checked by eye | Hologram or security label | – | ● |
| Holograms with smartphone check | Smartphone captures a unique optical feature | Hologram label | ○ | ● |
| Copy-evident codes | Fine structure in the printed code that is meant to change when reprinted | Printed code or sticker | ● | ● |
| Hidden features in the print | Hidden signal in print or varnish, detected by software | Nothing visible; change to the artwork | ○ | ● |
| Surface fingerprint | Photo of the natural micro-structure, compared with an earlier capture | Nothing, but each item must be captured | ● | ● |
| NFC or RFID chip | Chip responds by radio; cryptographic chips with a signature | Chip in the label or closure | ● | ○ |
| Serial number per item | A unique number matched against a database | Printed number or code | ● | – |
| Molecular markers | Substance detected in a lab or with a reader | Marker in the material or ink | – | ● |
"Identifier": the feature carries an identifier. "Authenticity": authenticity can be checked at the feature itself. ● typical property · ○ depends on the solution; for NFC: yes with cryptographic chips, no with simple chips · – usually not. The table only shows what the feature itself can do. Data analysis is not a property of the feature but of the platform behind it. It is possible with any method that is checked online. The groups overlap, and many solutions combine several methods.
Direct answer: Holograms and other optical features show colours, images or movement when tilted. They are checked by eye, without a device.
This is the oldest and best-known method. It works at once and needs no technology on the customer's side. But the check depends on whether the customer knows what the genuine feature looks like.
Direct answer: Here the hologram carries a feature that a smartphone can read. So the customer does not have to judge by eye whether it looks genuine.
Direct answer: A printed code, usually a QR code, carries a fine security structure. A reprint is meant to change this structure so that the check detects it. Two steps must be kept apart: any camera app can read the code, but only the provider's software can check the security structure.
These codes combine identification and authentication. Like a normal QR code, they lead to product information. And they are meant to show whether the code itself is an original. How reliably this works depends on the method, the print quality and the conditions during the check, such as light and camera.
Example: A counterfeiter photographs the code on a genuine product and prints it onto copies. A normal QR code would still work on the copy. A copy-evident code is meant to detect the reprint from the changed security structure.
Direct answer: A signal is hidden in the packaging, label or varnish, for example as a digital watermark or a pattern of tiny dots. The design stays the same.
Direct answer: Nothing is added to the product. Each item is photographed once and stored. Later, software compares a new photo with that capture.
Direct answer: A small chip sits in the label, the packaging or the closure. You check it by holding a smartphone against it.
Simple chips only return an identifier, which can be copied. Cryptographic chips answer each query with a new signature. This makes an authenticity check of the chip possible.
Direct answer: Each item gets its own number, stored in a database. When scanned, the server checks whether the number exists and how often it has been scanned. That is identification and data analysis, but not a physical authenticity check.
Serial numbers are the basis for traceability and the Digital Product Passport. But a printed number can be copied. That is why many manufacturers combine it with one of the other methods.
Direct answer: An invisible substance is mixed into the material or the ink. It can only be detected with a lab test or a special device.
Direct answer: "Can be checked with a smartphone" can mean very different things. Two questions matter: what does the normal camera app read? And what does the actual authenticity check need: an app, an SDK in your own app, or just the browser?
| Check route | Normal camera app reads | Authentication with | No install |
|---|---|---|---|
| Normal QR code | Identifier, usually a link | No check of the code itself; the server can flag unusual scans | Yes, but no authenticity check |
| Copy-evident code, app or SDK | Identifier | Dedicated app, or the brand owner's app with an SDK | No |
| Copy-evident code, browser | Identifier | Check in the browser after the scan | Yes |
| Hologram with smartphone check | Usually nothing | Usually a dedicated app, capture from several angles | Depends on the solution |
| Hidden feature in the print | QR code or link as entry point, if present | App or browser | Depends on the solution |
| Surface fingerprint | Nothing | App, after prior capture | Usually no |
| NFC chip | Chip identifier by tapping | NFC smartphone; signature with cryptographic chips | Often yes |
"No install" means the check runs with the camera and browser, with no app download. The table shows typical setups. Individual solutions differ.
Direct answer: Which properties matter depends on the use case. These three cases show typical requirements. They are not a recommendation for any particular method.
Filters, lubricants or tool accessories pass through many dealers in many countries. Workshops and end customers without training should be able to check them.
Industrial electronics or machine parts are sold individually and serviced later. Mainly service technicians and customer support check them, for example in warranty cases.
Drums, canisters or bags travel through long supply chains. In complaints or disputes, the origin must be provable.
Direct answer: What matters most is who should check. If customers, dealers and workshops should check for themselves, you need a method that works with a smartphone.
There is a standard for this choice: ISO 22383:2020. It replaces ISO 12931 and describes how to select and evaluate authentication solutions (DIN Media). The questions below follow its criteria:
The EUIPO anti-counterfeiting technology guide also gives an overview of the technologies and their terms (EUIPO).
There is no single best method. It depends on who should check, with what, and how valuable the product is. The standard ISO 22383 helps with the choice.
No. A scan first only reads an identifier. An authenticity check tests a physical feature, such as a structure in the code, a hologram, a chip or the surface itself.
Yes. Copy-evident codes, some holograms, hidden print features, surface fingerprints and cryptographic NFC chips can be checked with a smartphone. Some solutions need an app or SDK for this, others only the camera and browser. One example of a check without an app is the Crypto-Optical Technology by authentic.network.
Solutions that work in the browser or directly after scanning with the camera app need no app. These include some copy-evident codes, some hidden print features and cryptographic NFC chips. For copy-evident codes, one example is authentic.network from Chemnitz, Germany, with its Crypto-Optical Technology. Offline checks there need an app.
Only to a limited extent. A normal QR code can be photographed and reprinted, and the copy works just the same. But the server can flag unusual patterns, for example when the same identifier is scanned very often or in places far apart. Whether a single label is a copy only shows with a security structure in the code or a second feature.
Not directly. The passport protects data, not the product. A copied code also opens the genuine passport. More in DPP vs Anti-Counterfeiting: Do You Need Both?
Last updated: 17 November 2026